Packing Machines

SM 205E DS AUTOMATIC PACKING MACHINE FOR MATTRESSES Double stage for production increasing

SM 205E Options

  • SM 215P Pneumatic press
  • SM 215H Hydraulic press (30 tons) with conveyor belt – Placed separately on side
  • SM 200 Automatic stacker for mattresses (left or right exit on request)
  • MA-10 Storehouse for mattresses
  • Loader for mattresses on trolley with n. 2 trolleys included
  • Roller conveyor (Length 2200 x Width 2200 mm with 12 rolls, distance of rolls 200 mm mm)
  • Roller conveyor (Length 3000 x Width 2200 mm with 16 rolls, distance of rolls 200 mm)
  • Conveyor belt (Length 2200 x Width 2200 mm)
  • Conveyor belt (Length 3000 x Width 2200 mm)
  • Roller conveyor with n.6 belts for lateral in-feed (Length 2200 x Width 2200 mm 12 rolls)
  • SM 204 Overthrow and rotation plane for mattress cleaning or checking
  • SM 320 Rolling machine for pressed mattresses (fix diameter)
  • SM 320NAS Rolling machine for pressed mattresses adjustable diameter)

NOTE (1): Lateral presses to improve the polyethylene film adherence to the mattresses are not installed if SM205E is equipped by SM 215P


SM 205E Options (Usually requested by Hilding Group)

  • Double stage station
  • Second trolley fixed together out both sides on same guide (manual movement)
  • Second trolley placed behind out on same side (manual movement)
  • Motorization for both trolleys (one behind the other one)
  • Conveyor belt of 2,2 meters between trolleys
  • Adjustable height up to 250 mm of lower side welding bar
  • Flip down belt system at in-feed conveyor
  • Software to generate (*.xls or *.mdb format)
  • Andon lights
  • Device to hold down small mattresses (motorised roller) before they are covered by foil
  • Device to hold down small mattresses (free roller) after they are covered by foil
  • Device to advice upper and lower nylon roll is over (each trolley)
  • Extra light barriers as safety fences (complete set for both sides)
  • Belt under side welding bar station for waste out (right or left side to be decided)
  • Machine disposed for lateral adding second trolley
  • Extra conveyor with 2 belts and flip down device before in-feed conveyor
  • Laser sensor to be able to manage items of 40 mm high (each trolley)
  • Slow start controlled with inverter
  • Side guidance for each belt conveyor (left and right guidance)
  • Box for cycle initiate and program choose buttons
  • Extra gripper (each)